Tag: Batteries Manufacturers india

8 Tips for Inverter Battery Maintenance| Care of your Inverter Battery

Posted on by admin

Inverter batteries are an essential component of your emergency power supply system at home. Along with the inverter, the batteries help you get the backup when your electricity grid is at fault or the power supply is cut due to some other reason. It is important to buy a trusted inverter battery to get maximum backup and optimum performance without any hassles. 

Just buying the best battery won’t do!

These days many inverter battery manufacturers are developing batteries that are laden with latest features. The task is not over with buying the best battery, rather a good maintenance has to be carried out to ensure a long life of the batteries.

Let’s read on to know the tips to take care of the inverter batteries. These tips are to be followed for lead-acid  inverter batteries. Mostly the inverter batteries at homes are lead acid batteries and they require the following maintenance. Always handle the batteries carefully.Read and follow the instructions printed on the box and the manual. 

How to take care of your inverter battery?

1.They need ventilation:

Place the batteries in a well ventilated area so that the fumes and gases can escape out. Also ventilation helps to lower the temperature as compared to a congested place. The batteries get heated up during their working and a ventilated place with flow of air will help reduce the heat. This also prevents excess evaporation of the water from the battery as well thus less frequent water topping is required.

2.Check the water levels in the battery:

With a period of time the water inside the battery reduces due to the chemical reaction and the heat. The electrolyte solution inside the battery consists of a mixture of sulfuric acid and water. As the water level reduces the sulfuric acid becomes more concentrated. To prevent this water is added to maintain the concentration.

3.Tap water is a big no-no:

Never use tap water to refill or top-up the battery as they contain certain impurities which will hinder the reaction occurring inside the batteries and thus decreasing the performance of the  battery.

4.Clean battery is a happy battery:

Keep the battery surface clean and dust free by using dry cotton cloth.

5.The terminals should be rust free:

Rust free terminals ensure easy flow of electricity to and fro. Lead sulfate is produced at the junction, on the terminal which is a way of connection to the inverter. Lead sulfate increases the electrical resistance and thus hinders the flow of electricity between the inverter and battery. It affects the performance of the batteries in a negative way. Clean the terminals using nylon brush, warm water or with the right terminal cleaning solutions available. Always wear protective eyewear, rubber gloves and shoes to protect yourself while handling the battery.

6.Place the battery away from children and pets:

Batteries are dangerous as they contain sulfuric acid inside which is highly corrosive and they release toxic fumes as well. Keep the battery safe from children and pets to protect them. 

7.Inspect it regularly:

After you buy an inverter battery, just don’t leave it in any corner of your homes abandoned. Check them regularly and look out for any damage and leakage. If  you suspect anything then get them attended by an authorized mechanic. Do not try to handle a damaged battery, it can prove to be hazardous.

8.Check expiry date:

Keep a check on the expiry date of the inverter battery. Normally a battery would last up to 3-4 years depending on the company and  battery manufacturer. Replace old, expired or damaged battery at once. 

Hope these tips help you maintain your battery in its best health.

Looking to buy inverter batteries? Go for inverter batteries from Eco power, one of the reputed  inverter battery manufacturers in India. Visit their website at www.ecopowerbatteries.in to choose from their wide range.

6 Common Car Battery Problems Leading To Starter Issues

Posted on by admin

Car battery is the superhero that cranks up the engine and makes your car jump into action the moment the car keys are pushed in and turned. But what if your car doesn’t start at all, isn’t that a kind of annoying thing? Yes it is. You must have bought the car battery from the car battery manufacturer after so much research, still at times you can land in a situation when the car doesn’t start.

1.How does a car battery function

Car batteries are SLI batteries that are starting, lighting and igniting batteries. As the name implies they help the car to start. These batteries provide a huge amount of current in a short time to power up the car to bring it alive. 

The power is supplied to the car’s engine by the car battery then the car is powered with the alternator. Later on the car is charged with the help of the alternator.

Common battery problems

Now let us go through the common car battery problems that might be hampering the starting of the car. It could be due to our own mistakes or a manufacturing defect.

The following could be one of the reasons or a combination of reasons for starting issues of the car.

1.Corrosion of terminals 

It is one of the most common reasons for the car battery damage. Due to the corrosion happening at the terminals the performance will be hampered.

2.Separator failure

It separates the negative and positive plate and keeps them apart.The damage to the separator between the plates could lead to dysfunctioning.

3.Shed material

Due to long term usage or jolts and vibrations, the pasted material on the plates gets shed and this leads to decreased efficiency.

4.Breakage

There could be physical damage to the car battery from outside like on the container or inside on the plates. This happens due to vibration incurred on the adverse road conditions.

5.Low electrolyte level

Over time the electrolyte level gets depleted so it is always important to top it up with water. The electrolyte in the commonly used lead acid batteries is a solution of around 65% sulfuric acid and 35% water.

Prevention

If you travel a lot or use your car mostly on a daily basis it is a big disappointment when your car suddenly stops working or just becomes dead.

You can always take them to get replaced but as we all know prevention is better than cure hence show some care to your car battery by following these steps:

1.Check up:

Get your car checked frequently at an authorized car mechanic to remain updated about the car condition.

2.Battery tester

Use a battery tester to know about the car battery condition. Use the appropriate battery tester according to your battery. Normally the clips on the battery tester are attached to the battery terminals and then the tester gives the reading.

3.Find the right car battery

Always use the right battery for your car. This way you not only get improved efficiency but also it is better for the car’s health also. 

4.Check the expiry date

Check with the car battery to know about the expiry date. Replace them immediately when you see any damages to the car. 

I just wish your car battery never runs into any problem and is endowed with a long life but..but…everything has an expiry date. Sadly. But if you choose a powerful battery then you will have a longer lifespan compared to the other ones. For excellent performing car batteries choose them from Eco power, a leading car battery manufacturer in India that offer a load of high performance, efficiency and are pocket friendly as well. Check out their website at http://www.ecopowerbatteries.in/ for more information

Lead-acid automotive battery with advanced technologies- The best options for car owners

Posted on by admin

The best automotive battery manufacturer in India always ensures quality products for car owners. You know that battery technologies have undergone lots of transformation, as manufacturers use different chemistries. However, lead-acid batteries have not lost their importance in the automotive world. They store the electrical energy needed to add power to the electrical circuits of your vehicle.

While choosing lead-acid batteries for your car, you have to focus on two things- current and voltage. The standard voltage needs to be about 12.6V in the fully-charged condition. Lead-acid batteries used for automobiles produce voltage due to the metal plates immersed in a special solution. This solution contains sulphuric acid (35%) and water (65%).

The automotive battery manufacturer in India- Buy batteries for different vehicles–

You can buy your automotive battery for golf cars and several other automobiles. The lead-acid battery for automobiles has a grid structure and contains a lead alloy. Due to the softness of pure lead, manufacturers use a small amount of metals to increase the strength. The presence of other metals also refines electrical properties. The commonly chosen additives are selenium, tin, calcium, and antimony.


Tin and antimony will ensure a proper deep cycling process. However, it can raise the water consumption level. Moreover, calcium minimizes the self-discharge level of your battery. In the modern lead-acid automotive batteries, you can find doping agents, like cadmium, selenium, and other elements to reduce the proportion of calcium and antimony.
Deep-cycle and starter batteries–

While searching for lead-acid automotive batteries, you will get two options- the deep-cycle and starter battery. The starter battery helps in cranking the car’s engine, whereas the deep-cycle battery provides power consistently to your forklifts, wheelchairs, and golf cars. You may not find differences in design in these batteries. The peak power of the starter battery can be high. On the contrary, the power output level with the deep-cycle battery can be moderate, although it helps in the cycling process. The major differences are at the mechanical level.

The internal resistance level found in starter batteries is very low, and it is achievable by using some additional plates for the optimal surface area. Manufacturers apply the lead on the thin plates. However, plate thickness does not hold high importance due to the short discharge.

While buying starter batteries, you can find a marking- CCA. It shows how much current is delivered by the battery under low temperatures.

Deep-cycle batteries made of lead-acid have the optimal capacity with a higher cycle count. There is a use of thick lead plates for these batteries.  Although these lead-acid batteries are for cycling, you may find a risk of stress for full discharges. You can keep up moderate cycles by avoiding the full discharge. Charge your battery more frequently. You will notice Ah markings in deep-cycle batteries to indicate the level of current delivered by the battery.

Thus, lead-acid batteries for automobiles have complicated chemistry, and Indian manufacturers always try to provide the best output with their products.

Lorem ipsum dolor, sit amet consectetur adipisicing, elit. Voluptatibus, mollitia excepturi nihil, aperiam neque quaerat praesentium ipsum quis vitae provident! Odit dignissimos alias, maxime a dolor itaque velit tenetur vitae omnis sequi explicabo, unde numquam sint iusto veniam, nesciunt. Harum suscipit veniam, hic cupiditate illum itaque deleniti blanditiis sapiente voluptatum laudantium aperiam obcaecati ad. Consectetur libero ipsum, error repudiandae, consequuntur numquam unde minima, doloribus adipisci ab ad dolorum perspiciatis similique? Iusto quod praesentium ipsum eaque optio eligendi, aliquam ratione ea tempore officia odit! Cum illum non iusto molestiae rem laboriosam quis et officiis omnis nostrum nobis temporibus, voluptates, quisquam excepturi.